The Bionics SH-1003HT Gas Detectors
The Bionics SH-1003HT Gas Detectors are designed to set new standards in toxic gas monitoring and detection. Featuring a sophisticated electronic "brain" built directly into the sensor assembly, these well-proven continuous extractive detection systems significantly reduce the labour and downtime commonly associated with gas detector maintenance and service.
Equally important, the SH-1003HT is specially engineered to permit high density installation, packing up to 3 times as much monitoring into the same, compact footprint as previous models. The instruments' "smart" circuitry permits ex-situ or off-site calibration and maintenance of the sensor cell, significantly reducing the amount of time personnel must spend in restricted or sensitive areas.
The unit features user-programmable dual-level concentration alarms, built-in alarm relays, and 4 - 20mA output as a local digital readout, audio and visual alarm indicators. Plus, when used in conjunction with the Bionics RX-1G or MDS-8 Controller, system operation is almost totally self-supervised to provide quick and easy fault identification and notification.
Specifications
- Suction Based Gas Detector
- Ideal for End-Point Detection
- Quick and Simple off-site Calibration
- Power Requirments 24VDC
- Enhanced Self-Diagnostic Capability
- Compact and Highly-Densities Design
- 4-20 mA Analog Output
Available Sensors for Instrument
- Model GS-100HT-J - Chlorine 0-1.0 ppm
- Model GS-360HT-J - Hydrogen Cyanide 0-6 ppm
- Model GS-480HT-J - Hydrogen Chloride 0-6 ppm
- Model GS-550ET-J - Sulfur Dioxide 0-6 ppm
- Model GS-780HT-J - Hydrogen Fluoride 0-9 ppm
- Model GS-900HT-J - Bromide 0-3 ppm
- Model GS-1200ET-J - Carbon Monoxide 0-75 ppm
- Model GS-1401HT-J - Fluoride 0-3 ppm
- Model GS-1551HT-J - Hydrogen 0 - 4000 ppm
- Model GS-1680HT-J - Acetic acid 0-30 ppm
- Model GS-1750HT-J - Nitrogen Dioxide 0-9 ppm
- Model GS-2460HT-J - Ammonia 0-75 ppm
- Model GS-3180HT-J - General Acid 0-9 ppm
- Model GS-3480HT-J - Hydrogen Bromide 0-9 ppm
- Model GS-3780HT-J - Fluoride 0-3 ppm
- Model GS-4060HT-J - Hydrides (SiH4, PH3, AsH3) 0 - 0.5 ppm
- Model GS-4150HT-J - Nitrogen Trifluoride 0-30 ppm
- Model GS-4380HT-J - Chlorinated Hydrocarbons 0-200 ppm
- Model GS-4580HT-J - Sulfur Hexafluoride 0-200 ppm
