GDS XDIwin-F1 Hazardous Area Gas Detector

The GDS XDIwin-F1 is an explosion proof gas detector fitted with an on-board display, relays, 4-20mA and CAN bus outputs. The unit is available with electrochemical, catalytic, semiconductor and infrared sensor options for all your hazardous area gas detection.

The GDS XDI-F1win is capable of independent operation or multi-point system configuration networking several gas detectors back to a central control panel. With its on-board relays, the monitor has the added ability of stand-alone operation, activating alarms, horns, or fans and can also shut down a system without the need to wire back to a central control panel. The GDS XDI-F1 also offers a relay deactivation feature to prevent accidental alarm activation during calibrations. The units also feature simple non-intrusive calibration, easy to read display, programmable alarms and on-board sensor life indicators.

The GDS XDI-F1win is designed to operate in hazardous and tough environments protecting the safety of your people and facilities.

Specifications

  • Explosion proof, IECex rated
  • Three alarm points
  • CAN Bus and 4-20mA outputs
  • Detects Toxic, Flammables and Oxygen
  • Electrochemical, Catalytic, Infrared and PID Sensor Options
  • Back lit alpha numeric full status display
  • Non intrusive adjustment magnets
  • One man calibration
  • II 2G Ex db IIC T6…T4 Gb
  • II 2D Ex tb IIIC T85°C…T135°C Db

Available Gases

  • Oxygen (O2), range 0-25%
  • Carbon Monoxide (CO), range 0-250 ppm
  • Hydrogen Sulphide (H2S), 0-50 ppm
  • Nitrogen Dioxide (NO2), range 0-10 ppm
  • Hydrogen (H2), range 0-2,000 ppm
  • Chlorine (CL2), range 0-10 ppm
  • Hydrogen Cyanide (HCN), range 0-25 ppm
  • Nitrogen Oxide (NO), range 0-100 ppm
  • Hydrogen Chloride (HCl), range 0-10 ppm
  • Ammonia (NH3), range 0-100 ppm
  • Ozone (O3), range 0-2 ppm
  • Ethylene Oxide (ETO), range 0-25 ppm
  • Flammable (LEL), range 0-100%
  • Refrigerant, 0-10,000 ppm

Downloads